Rust Conversion Spray

Chisboom Rust Conversion Spray is a product that contains a weakly acidic polymer complex that can convert iron oxide (rust) from steel into organic iron compounds. Its excellent rust conversion function can be coated with rust. Rust Conversion Spray has good cathodic protection effect, and its wear resistance, durability, adhesion, and impact resistance are equally excellent. It has excellent oil resistance, solvent resistance, and salt spray resistance. The coating dries quickly and the interlayer adhesion of the paint film is strong.

Usage

1. Please shake this Rust Conversion Spray well before use.

2. Directly aim at the desired area and spray the rust conversion agent on the surface of the steel workpiece at a distance of about 15cm from the bottle body.

3. A chemical reaction will occur on its surface in about one minute, and it will dry out and form a protective film in 15-20 minutes

4.Subsequent painting work can be carried out in hours.

5.For those with high requirements and as the final anti-corrosion coating, Rust Conversion Spray can be sprayed 1-2 times every 30-60 minutes on the basis of one coat to make the film layer uniform, dense, bright, and have stronger anti-corrosion performance.

6.For workpieces with severe oil stains and spots on the surface, the oil stains and spots must be removed first before painting.

Special Reminder

1.Do not store in a temperature higher than 49℃ or near a fire source. Rust Conversion Spray is strictly prohibited to puncture the can body.

2.Pay attention to protection during spraying. If you accidentally come into contact with eyes and skin, rinse immediately with water or seek medical attention as appropriate.

3.Far away from children's reach

4.Should be used in a well ventilated environment

RUST CONVERSION AGENT

Main components：Surfactants, phosphoric acid, solvents, projectiles.

Warning

Dangerous Statement

Flammable liquids and vapors, ingested and entering the respiratory tract, may be harmful, toxic to aquatic organisms, and have long-lasting effects.

[Preventive measure]

1.Far away from sources of fire and heat.

2.It should be stored and transported separately from oxidants and edible chemicals.

3.Take measures to prevent static electricity, containers and receiving equipment

4.Grounding and connection.

5.Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

6.Wear protective gloves, goggles, and face shields.

7.Thoroughly clean the body contact area after operation.

8.No eating, drinking, or smoking allowed in the workplace

[Accident Response]

1.If in contact with skin (or hair): immediately remove the affected area polluting clothing, rinse with soapy water and clean water.

2.Ingestion: Drink plenty of warm water, induce vomiting, seek medical attention, avoid use adrenaline.

3.Collect leaks.

4.In case of fire, dry powder, foam, carbon dioxide sand extinguishing

[Safe Storage]

Store in a cool and well ventilated place. Locked storage

[Waste Disposal]

Dispose of waste, pollutants, and empty containers in accordance with national/local regulations

National Chemical Accident Emergency Consultation Hotline:0532-83889090

Executive standard: BB/T 0047

Production date: see can bottom

Validity period: Three years . Qualified inspection